r-tec SIRIUS 14017 TCE Large Industrial Motor

Overview

Hangar foldable doors, two-leaf sliding large-frame doors and wide-span industrial sectional doors are loads no light drive can handle — and the r-tec SIRIUS 14017 TCE was developed for exactly this class. It brings together a 140 Nm torque class motor, 380 V three-phase supply, 0.55 kW power and 17 cm/sec movement speed. Open/close limit positions are configured in software via the electronic limit switch, and the shaft-driven construction couples the motor directly to large doors. Manual operation through the chain mechanism comes as standard for power outages.

Key specifications (PDF verified)

Feature	Value
Full product name	SIRIUS 14017 TCE
Power supply	380 V three-phase
Motor power	0.55 kW
Torque	140 Nm
Movement speed	17 cm/sec
Limit switch	Electronic limit switch
Drive	Shaft driven
Manual mode	Chain mechanism (during power outage)

10024 TCE vs 14017 TCE

Feature	10024 TCE	14017 TCE
Torque	100 Nm	140 Nm
Motor power	0.37 kW	0.55 kW (48% more powerful)
Movement speed	24 cm/sec	17 cm/sec (heavy-door fit)
Target market	Medium-large	Large + hangar
Control board	GIGA Sedo / I-380	GIGA Sedo recommended

→ 10024 TCE is sufficient in standard industrial applications; 14017 TCE is mandatory for hangar + two-leaf sliding + wide-span sectional applications.

GIGA Sedo control board (recommended)

The recommended control board for the 14017 TCE motor is GIGA Sedo — premium board with Sommer Antriebs OEM partnership:

• LCD menu — Parameter setting + error tracking
• RS485 — Building automation system integration
• Induction loop — Forklift vehicle detection, automatic opening
• Service counter — Periodic maintenance warning

Also works with I-380; on large doors, GIGA Sedo’s advanced control functions use the full capacity of 14017 TCE.

Target projects

• Hangar foldable door (aircraft/helicopter)
• Two-leaf sliding large-frame (10+ metre span)
• Wide-span industrial sectional (8-12 m)
• Automotive factory main entrance + supply dock
• Logistics terminal large vehicle dock door
• Port + organised industrial zone entrance

Field discipline

• Three-phase 380 V supply quality — Clean supply required for high torque; if voltage fluctuation > 10%, input regulator recommended
• Limit switch calibration — Full open + full close limit positions programmed via control board
• Manual mode test — Chain mechanism’s open/close action is periodically verified (critical in emergencies)
• Periodic maintenance — Once every 3 months limit switch + chain mechanism + reducer oil check (tight maintenance for large motor)
• Cooling — High torque motor generates heat; 15 cm clearance and ventilation around motor