r-tec SIRIUS 10024 TCE Industrial Door Motor

Model in the technical sheet

r-tec SIRIUS 10024 TCE is named in a sectional industrial door motor sheet. Its table gives 380 V input, 100 N·m capacity, 0.37 kW motor power and 24 cm/sec speed. The speed is the value printed in the sheet, not a promised opening time for an installed door.

Mechanical features

The sheet lists an electronic limit switch, shaft drive and manual operation via a chain mechanism. This short document does not itemise kit contents, specify a door size or name a compatible controller.

Project matching

Direct GIGA Sedo or I-380 pairing, suitability for a Full Vision door and fixed site-maintenance intervals are not established by this motor sheet. Confirm the board, door geometry, safety devices and manual-operation procedure against full installation documents.

The electronic limit switch appears in the product description, but this one-page sheet does not explain how to program limits on an installed controller. The chain mechanism denotes manual operation without giving a universal release procedure for every power-loss scenario. Safe steps have to come from the complete installation instructions for the supplied motor, board and door.

For comparison, the 10024 TCE-C sheet also publishes 100 Nm, 0.37 kW and 24 cm/s; its own English sheet adds shaft-bore, IP and duty information. Those extra values must not be transferred to the standard TCE. The 14017 TCE publishes 140 Nm, 0.55 kW and 17 cm/s. Higher torque does not make it mandatory or suitable for every large door. These are motor-sheet comparisons, not a calculated speed or load rating for the finished door.

Provide opening dimensions, leaf mass, shaft dimensions and balancing details for a quotation. Check the controller, photocells and other safety devices against their own documents. This sheet provides neither a full kit inventory nor an approved GIGA Sedo/I-380 pairing or maximum Full Vision dimensions; the proposed assembly and its wiring need separate confirmation.