Technical files
Documents
Specifications and installation information can be viewed or downloaded as PDFs from our server.
Technical documents
2Certificates
1Key technical specifications
The most critical technical parameters of this product.
- Power supply 230 VAC 50 Hz
- Motor type 230 VAC (AC motor)
- Motor power 400 W
- Current draw 1.3 A
- Operating temperature -20 – +55 °C
- Protection class IP44
Show all technical specifications (10)
Performance
| Feature | Value |
|---|---|
| Speed | 16 cm/s |
Mechanical
| Feature | Value |
|---|---|
| Motor weight | 10 kg |
| Max. door weight | 2,000 kg |
Protection
| Feature | Value |
|---|---|
| Thermal protection | Standard (motor winding) |
Videos
Installation and support guides
These videos demonstrate the model and control board shown. They may provide general reference for other products; use the current technical manual for the relevant model for connections and settings.
220 V sliding gates 7 videos
Motor connection, limits, photocell, warning lamp and remote controls.
Example installations with the r-tec 220 board; not transferable to FU inverter or 380 V systems.
Turkish video archive from the Alkur YouTube channel; titles and topic notes are translated.
System / board reference
An overview of the r-tec 220 control board, its layout and main connection points.
- 2:48 Watch on YouTube
An overview of the r-tec 220 control board, its layout and main connection points.
- 1:23 Watch on YouTube
A demonstration of adjusting opening and closing limits on a 220 V sliding gate motor.
- 0:48 Watch on YouTube
A short technical demonstration of connecting the motor to the r-tec 220 control board.
- 1:26 Watch on YouTube
A guide to connecting a safety photocell to the r-tec 220 control board.
- 0:21 Watch on YouTube
A short example of connecting a warning flasher to the r-tec 220 control board.
- 0:48 Watch on YouTube
A demonstration of pairing a Fix Code remote control and clearing stored remote-control entries.
- 1:06 Watch on YouTube
A guide to connecting an external remote-control receiver to the r-tec 220 control board.
Overview
KING 2000 takes the same 220 V AC sliding family up to its 2,000 kg class, the heavy-segment member of the range. With its 400 W motor it shares the same motor class as KING 1000; the difference is not in power but in the maximum door weight it can carry (2,000 kg instead of 1,000 kg). The same 10 kg motor body is used, so site installation is identical to KING 1000 (shared hole template + connection plan).
KING 1000 vs KING 2000 — segment difference
| KING 1000 | KING 2000 | |
|---|---|---|
| Motor power | 400 W | 400 W |
| Max. door weight | 1,000 kg | 2,000 kg |
| Speed | 16 cm/s | 16 cm/s |
| Current | 1.3 A | 1.3 A |
| Body + weight | Same (10 kg) | Same (10 kg) |
| Market segment | Residential + office | Plaza + campus + medium industry |
→ The only difference is the maximum door weight; both models operate in the 1,000-1,200 kg range, and for heavy doors KING 2000 is recommended (higher door-weight class, wider margin).
Target projects
- Plaza and office campus vehicle entry-exit (high-frequency)
- Medium-segment industrial facility main entrance
- Shopping centre car park vehicle lanes (side entrance)
- Logistics warehouse vehicle entry control points (1,500-2,000 kg heavy doors)
Field discipline
The same field discipline as KING 1000 applies. In addition:
- Heavy door rails should be steel + 5 mm or more thick; thin rails bend and the motor is strained.
- Limit switch buffer of 10 cm is recommended (5-10 cm is sufficient on KING 1000); on heavy-momentum doors the braking distance grows.
- The electronic brake trimpot must be adjusted according to the door weight — do not start by copying the KING 1000 setting, KING 2000 must be calibrated to the site.
Model notes
Read the product family warnings and brake / limit settings before installation. Detailed connection schematic and torque table are in the technical PDF.
In which sectors is it used?
This product family is preferred in the sectors and application areas below.
- Factory and production facility
- Logistics warehouse entrance
- Heavy industry facility
Frequently Asked Questions
Below we've compiled the most common questions and answers regarding this product.
-
What door types is KING 2000 used on?
With a 230 V single-phase supply it is used on sliding leaves up to the 2 000 kg class: factory and warehouse yard gates, residential-complex and logistics site entrances, and heavy steel-fabricated leaves. On sites where a three-phase supply cannot be run, this is the top of that class; above 2 000 kg the 380 V three-phase KING 2500 or KING 4000 takes over. The IP44 rating allows outdoor use, but the motor should be positioned so it is not in the path of direct running water.
-
Is a speed of 16 cm/s enough on a busy entrance?
The calculation follows the opening width: on a 6 m opening, full travel at 16 cm/s takes about 38 seconds, and closing and dwell time add to that. On entrances where vehicles queue, this can be too slow. There are two routes for heavy traffic: a partial-open setting that stops the leaf at a sufficient passage width instead of travelling fully, or the high-speed HATTI 1200 HS in the 24 V range. Raising speed also raises acceleration and braking loads, so the leaf and track must suit it.
Contact our team for model-specific information or a quote.