Technical files
Documents
Specifications and installation information can be viewed or downloaded as PDFs from our server.
Technical specifications
2Videos
Key technical specifications
The most critical technical parameters of this product.
- Power supply 230 VAC 50 Hz
- Motor voltage 24 VDC
- Motor power 120 W
- Speed 1.3 / 2.0 cm/s
- Max. leaf length 3 m
- Max. door weight 600 kg
Show all technical specifications (13)
Mechanical
| Feature | Value |
|---|---|
| Motor dimensions | 820 × 100 × 110 mm |
| Motor weight | 7 kg |
| Arm mechanism | Fast articulated |
| Protection class | IP44 |
| Operating temperature | -20 – +50 °C |
Control
| Feature | Value |
|---|---|
| Control unit | G24 (compatible with battery charger board) |
Protection
| Feature | Value |
|---|---|
| Thermal protection | Standard |
Overview
Think of JET 24 as the muscled-up COUPER 24: it builds on the same articulated-arm mechanism architecture, but a 120 W motor (vs COUPER 24’s 85 W) and a different gear ratio push capacity up to 3 m of leaf and 600 kg of heavy door (COUPER 24 is limited to 2 m / 250 kg). Its high-speed step runs at 1.3 / 2.0 cm/s — 25% faster than COUPER 24’s 1.3 / 1.6 cm/s.
Why JET 24?
| Scenario | Recommended |
|---|---|
| Residential garden gate, light (≤ 250 kg) | COUPER 24 |
| Heavy door (250-600 kg) + up to 3 m | JET 24 ✓ |
| Wide leaf (up to 4 m) | PRINCE 24 |
| Single-phase 220 V installation | SW2 |
JET 24 uses the same site geometry (A-E dimensions) and the same G24 control board as COUPER; thanks to hardware compatibility, the COUPER→JET upgrade is easy at the same site (motor change only).
Target projects
- Premium villa main entrance gate (frequent use)
- Hotel / boutique accommodation private entrance (guest flow important)
- Restaurant VIP entrance (peak-hour traffic)
- Backup/side entrance gate (quick access priority)
- Premium villa complex pedestrian + vehicle combined entrance
Field discipline
- Speed + trapping risk — Faster closing increases trapping risk; two photocell channels (opening + closing) must be connected mandatorily.
- Brake adjustment — In site trial the braking distance must be checked; hard landing accelerates fatigue on the motor bearing and hinges.
- Hinge quality — Sprung or well-bearing hinges are mandatory for fast movement; old/stiff hinges do not work.
- Double-leaf synchronisation — Two JET 24 motors are driven in a double-leaf system with the G24-MTS module; sync limit setting is critical.
- Periodic maintenance — For heavy use, every 6 months hinge lubrication + reducer check (12 months on COUPER).
Model notes
Select the arm force and open speed parameters according to the table in the PDF. Because JET 24 contains a stronger motor winding, the G24 control board version must be compatible (dealer configuration confirms). The standard COUPER 24 board may run JET marginally; specialised drive electronics are required.
Contact our team for model-specific information or a quote.