r-tec Dinamix 4000 / 5000 (Standard Barrier)

Overview

Dinamix 4000 and 5000 are the standard industrial solution of the r-tec barrier family. The classic variant without DinamixBar’s premium LED bar; with 4.25 m and 5.25 m arm length, they control vehicle flow at car park, factory entrance, shopping mall and estate entries and exits. They share the same 230 VAC + 24 VDC + 190 W common hardware with the entire Dinamix/DinamixBar family — dealer stock and service strategy remains simple.

Dinamix 4000 vs Dinamix 5000

Feature	Dinamix 4000	Dinamix 5000
Arm length	4.25 m	5.25 m
Opening time	3.5 – 4 sec	3.5 – 5 sec
Target passage width	3 – 4 m	4 – 5 m
Typical use	Single-lane car park	Wide lane + service entry
Supply + motor	230 V / 24 V / 190 W	Same

→ For standard single-lane car park, Dinamix 4000; for wide lane (double vehicle row, service truck) Dinamix 5000.

Dinamix vs DinamixBar — difference

Feature	Dinamix (this page)	DinamixBar
Arm decoration	Plain white + red reflector	LED bar passage (premium)
Upper cover	White hard plastic	RAL 9006 grey aesthetic
Traffic light	Optional add	Integrated multi-mode
Opening speed	Standard	10-12% faster
Target market	Industrial / cost-focused	Premium / aesthetic priority
Profile	Compact	Premium price

→ Plain industrial application, cost-priority project → standard Dinamix; aesthetic accent, corporate entrance, lobby → DinamixBar.

Classic barrier architecture

The Dinamix standard barrier offers a classic industrial look with RAL 2004 orange galvanised powder-coat body + white hard plastic upper cover. A single-mode LED flasher on the upper cover blinks during barrier movement — warning signal to the driver. Red reflector on the lower strip of the arm reflects from headlights at night.

Smart passage integration (KGS / OGS)

A shared feature of the entire Dinamix/DinamixBar family. With the Open and Close dry contacts on the control board:

• KGS — Card access system (car park, closed estate, corporate entrance)
• OGS — Automatic passage system (highway toll, parking meter, plate recognition)
• Smart card systems — RFID, fingerprint, plate recognition cameras
• Remote control — 433 MHz rolling code
• Synchronised dual barrier — Entry + exit parallel single board

Safety and continuity

• Obstacle detection — Stops and reverses when object/vehicle detected on closing
• Soft start / soft stop — Ramp protecting mechanical components
• Photocell + glass fuse + current control — Triple protection
• Battery charger board (optional) — Operates during power outage
• Manual intervention — Body can be opened manually in emergency

Target projects

• Shopping mall and plaza car park entries
• Factory and industrial facility entrance control
• Closed estate, residence and plaza entries
• Logistics terminal and cargo distribution
• City car park + parking meter
• Corporate campus vehicle control

Field discipline

• Arm level adjustment — When barrier is closed, arm should be horizontal (parallel to ground); inclined position causes spring + lap wear
• Spring balance check — Spring tension inside arm checked every 6 months; loose spring causes heavy movement during opening
• Reflector cleaning — Red strip visibility decreases under heavy dust/dirt; wipe every 3 months
• Periodic maintenance — Once every 12 months reducer + current board + safety chain check
• Correct model selection — 4000 vs 5000 based on passage width; too small a barrier causes heavy closing