Technical files
Documents
Specifications and installation information can be viewed or downloaded as PDFs from our server.
Technical specifications
2Videos
Key technical specifications
The most critical technical parameters of this product.
- Input voltage 230 VAC 50 Hz
- Motor 24 VDC brushless
- Motor power 190 W
- Arm length (Dinamix 6000) 6.25 m
- Arm length (Dinamix 7000) 7.25 m (6.25 m + 1 m telescopic extension)
- Arm mechanism Telescopic (extendable)
Show all technical specifications (12)
Performance
| Feature | Value |
|---|---|
| Opening time (6000) | 4 – 6 sec |
| Opening time (7000) | 4 – 7 sec |
Mechanical
| Feature | Value |
|---|---|
| Body colour | RAL 2004 orange (galvanised powder coat) |
| Upper cover colour | White (impact-resistant hard plastic) |
| Protection class | IP44 |
Control
| Feature | Value |
|---|---|
| Automatic closing time | 5 – 90 sec (adjustable) |
Overview
Dinamix 6000 and 7000 are the long-arm industrial solution of the r-tec barrier family. With 6.25 m and 7.25 m arm length, they control vehicle flow at double-lane car parks, logistics terminal vehicle queues, highway tolls and wide facility entries. Thanks to the telescopic arm mechanism, depot + transport + field balancing is easy — the barrier is extended and locked during installation.
Dinamix 6000 vs Dinamix 7000
| Feature | Dinamix 6000 | Dinamix 7000 |
|---|---|---|
| Arm length | 6.25 m | 7.25 m |
| Telescopic extension | Telescopic arm | 1 m additional |
| Opening time | 4 – 6 sec | 4 – 7 sec |
| Target passage width | 5 – 6 m | 6 – 7 m |
| Typical use | Double lane + service | Logistics + highway + large facility |
→ For standard double-lane car park, Dinamix 6000; for logistics terminal, highway toll and large facility, Dinamix 7000.
Telescopic arm — why?
A single-piece 7 m barrier arm creates serious difficulty in depot + transport + field balancing:
- Depot — 7 m arm must be stored uncoiled; depot space loss
- Transport — 7 m horizontal package requires large truck, cost
- Field balance — Single-piece 7 m arm loads on motor + reducer + bearing investment
The telescopic version comes in 2 pieces:
- Main arm — 6.25 m portion fixed
- Extension (telescopic) — 1 m extension, locked during installation
→ Depot + transport + installation 40% easier; dealer operational advantage.
Dinamix vs DinamixBar (long arm)
| Feature | Dinamix 6000/7000 (this page) | DinamixBar 6000/7000 |
|---|---|---|
| Arm decoration | Plain white + red reflector | LED bar passage (premium) |
| Upper cover | White hard plastic | RAL 9006 grey aesthetic |
| Traffic light | Optional add | Integrated multi-mode |
| Target market | Logistics / cost-focused | Premium / corporate |
| Profile | Compact | Premium price |
→ Logistics terminal, cargo distribution, OSB entry → standard Dinamix long arm; corporate campus, premium plaza → DinamixBar long arm.
Smart passage integration
Same KGS / OGS / RFID / plate recognition compatibility as the entire Dinamix family. On single-phase supply, single barrier or synchronised dual barrier (entry + exit parallel) is driven on a single board.
Safety
- Obstacle detection — Stops and reverses when object/vehicle detected on closing
- Soft start / soft stop — Critical for long arm; hard start causes arm oscillation
- Photocell + glass fuse + current control — Triple protection
- Battery charger board (optional) — Mandatory for logistics terminal + airport applications
Target projects
- Logistics terminal and cargo distribution centre
- Highway toll and special road control points
- OSB and large industrial facility entrance
- Double-lane car park (5-7 m passage)
- Port + land transport control point
- Wide shopping mall car park entry-exit (especially 7000)
Field discipline
- Telescopic locking — Telescopic lock pin must be fully seated during field installation; loose pin risks arm flying off during opening
- Arm balance — Balance spring tension is set tighter on long arm than standard arm
- Reflector quality — Night visibility is critical on 6-7 m arm; worn reflector renewed every 6 months
- Drive speed calibration — Long arm opens slowly; hard speed setting = arm breakage risk
- Periodic maintenance — Once every 6 months spring + reflector + reducer check (tighter than standard Dinamix)
- Correct sizing — Selecting an arm larger than the passage is unnecessary cost; smaller arm causes heavy closing
Contact our team for model-specific information or a quote.