r-tec DinamixBar 4000 – 5000

Overview

DinamixBar 4000 and 5000 are a premium barrier pair in 4.25 m and 5.25 m boom lengths. Unlike the standard Dinamix series, they come with a 24 V LED strip in the lower seal of the boom, a multi-mode traffic light on the top cover, and a RAL 9006 grey aesthetic top cover. The opening time is 10–12% faster than the standard line (starting from 3.5 seconds) — a visible performance increase at high-traffic corporate entrances.

Visual and lighting system

Boom lower seal (24 V LED strip): The strip LED integrated into the lower surface of the boom provides reflector-independent visibility in night conditions and also creates emphasis along with the brand logo.

Top cover traffic light (red/green multi-mode): During barrier opening and closing movements red LED illuminates; when the boom reaches the fully open position and during the automatic closing waiting time, it transitions to green LED. This serves as an open transit notification for the user — there is no need to connect a separate traffic light.

Smart access integration

Thanks to the Open and Close dry contacts on the control unit, it connects directly to the following systems:

• KGS (card access system)
• OGS (automatic access system)
• RFID, fingerprint reader, plate recognition cameras
• 433 MHz rolling-code remote control (2,000 to 240,000 copies capacity)
• Synchronised double barrier (highway and double-lane entry-exit)

Safety

• Trap detection: When an object/vehicle is seen in the closing direction, the barrier stops and reverses to the opening direction; after the object clears, it closes automatically. On detection in the opening direction the boom stops immediately.
• Glass fuse + current control: When overcurrent is drawn, the board and motor are protected by the fuse + control circuit.
• Soft start / soft stop: Deceleration is applied at the end of opening and closing against hard impacts.
• Manual intervention + battery charger board (optional): Manual opening + battery supply for uninterrupted operation during power outages.
• Photocell support: Separate photocell channels in the closing and opening directions are supported (G24 board 2 photocell terminals).

Target projects

• Plaza and shopping centre car parks (4–5 m lane width)
• Closed estate entry-exit (with RFID integration)
• Factory main entry-exit (high-traffic corporate emphasis)
• Hospital, hotel and airport VIP entry points

Certification

CE Declaration of Conformity GAC-352/23 (Global Certification Network, 08.12.2023) — 2014/30/EU EMC + 2006/42/EC Machinery Safety, IP44 protection. Test reference TS EN 61000 family, TS EN 55011 and TS EN 60204-1.

Model notes

The boom kit, fork foot and the torque table showing balance are in the technical PDF. The boom can be mounted to the right or left; the entry-exit direction and the location of the electrical panel are determinant during the site survey. Because the same G24 control board is used as the standard Dinamix family, the control part is shared at existing Dinamix sites — the dealer stock strategy remains simple.