r-tec DinamixBar WM 3000: Post-Free Barrier, Three-Second Passage

Some entrances need a barrier but have no room for a post: narrow ramps, in-garage passages, building faces without a kerb. The classic barrier’s first requirement — a body planted into the ground — cannot be met at these points. The DinamixBar WM 3000 is the product of exactly that scenario: the body mounts not on the floor but on the wall.

Wall Mount: The solution in the name

WM — “Wall Mount”. The barrier mechanism fixes to the wall, and the 3.25 m arm closes a single-lane vehicle passage. Floor excavation, foundations, post plinths all drop out of the equation; in indoor and narrow-entrance applications the barrier takes its place without disturbing the architecture.

Fastest in its class

The WM 3000’s second claim is speed: opening in 3 seconds makes it the fastest barrier in its class. For vehicles arriving back-to-back in the morning rush, that means the queue simply never forms. The black body and red LED stripe aesthetic is designed for lobby entrances and prestige interiors where industrial orange would feel loud.

Multi-product flexibility with G24

On the control side, the WM 3000 uses the G24 board’s multi-product mode: the same motor platform can, when needed, serve as a barrier, a sliding gate, a swing gate or a sectional door application. The project changes, the need evolves — the hardware doesn’t go to waste. With 230 VAC input, a 24 VDC motor and 190 W power, it shares the Dinamix family’s common platform and comes ready for KGS, OGS, RFID and remote-control integrations.

Where does it fit?

In-garage level crossings, narrow site entrances, internal control points in loading yards, and every architectural detail that refuses a post. For wide outdoor entrances, the family’s Dinamix and DinamixBar models take the stage; the narrow, demanding spots belong to the WM 3000.

If you have a wall, you have a barrier. The technical breakdown is on its own page; for your project, the contact form is always open.